AC Board Pro - 200A Single Inverter
200A max Commercial switchboard with Grid Protection Relay (GPR)
Ideal for commercial solar systems using a single inverter up to 110kW. Can be used with the following inverters:
SMA Sunny Tripower Core 2 110kW inverter SolarEdge 100kW inverter
This Solar Distribution Board is also suitable for most other inverter brands - contact us for compatibility.
Fully labelled with additional labels for main switchboard Grid protection relay (GPR) settings pre-configured to meet Australian Standards and utility requirements Specifications Secondary network protection & solar distribution board includes the following:
Metal enclosure, 800(H) x 600(W) x 250(D) mm
Powder-coated steel with top and bottom gland plates
IP 66 rated for outdoor installation
3-point lockable handle
200A MCCB main switch
200A MCCB inverter circuit breaker
200A N/O contactor
6A internal GPO
Spare 3 phase 6A MCB
Secondary network protection relay (preprogrammed to utility requirements)
Pre-labelled with additional labels included for main switchboard
All components pre-wired and checked with 2-step QA process
Suitable for a maximum fault current 17kA
Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2014, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016
The fastest and easiest way to install commercial solar systems
AC Solar Warehouse Commercial Solar Switchboards accommodate all of the electrical hardware required to install three-phase commercial solar systems. For little more than the cost of the components themselves, this solar switchboard saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Designed and certified by Registered Professional Engineers with CEC design accreditation and over 2 decades of commercial solar system design experience
Designed to meet the specific faults levels at each site.
Designed to meet distribution utilities network protection requirements
Simplifies engineering sign-off for solar projects.
Compliant with Australian and New Zealand standards
Compliant with appropriate electricity utility standards (i.e. optimum secondary network protection and cabling solution)
Indoor or outdoor installation
Temperature resistant enclosures to extend the life of electronics in the switchboard
Completely pre-wired and tested
Pre-labelled to AS/NZS5033 and AS/NZS4777 requirements with labels for mainboard also included
Professional Engineering Services
We have experienced in-house Registered Professional Engineers for design, test and inspection reports required by selected utilities for systems above 30kVA. (costs apply so contact us for pricing)
Schematic diagrams
Design Certification Reports (DCR)
Compliance Assessment Reports (CAR)
Power Quality Testing
We prepare fault level calculations which vary from site-to-site and determine the network protection requirements to suit the specific distribution utility's requirements.
200A max Commercial switchboard with Grid Protection Relay (GPR)
Ideal for commercial solar systems using a single inverter up to 110kW. Can be used with the following inverters:
SMA Sunny Tripower Core 2 110kW inverter SolarEdge 100kW inverter
This Solar Distribution Board is also suitable for most other inverter brands - contact us for compatibility.
Fully labelled with additional labels for main switchboard Grid protection relay (GPR) settings pre-configured to meet Australian Standards and utility requirements Specifications Secondary network protection & solar distribution board includes the following:
Metal enclosure, 800(H) x 600(W) x 250(D) mm
Powder-coated steel with top and bottom gland plates
IP 66 rated for outdoor installation
3-point lockable handle
200A MCCB main switch
200A MCCB inverter circuit breaker
200A N/O contactor
6A internal GPO
Spare 3 phase 6A MCB
Secondary network protection relay (preprogrammed to utility requirements)
Pre-labelled with additional labels included for main switchboard
All components pre-wired and checked with 2-step QA process
Suitable for a maximum fault current 17kA
Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2014, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016
The fastest and easiest way to install commercial solar systems
AC Solar Warehouse Commercial Solar Switchboards accommodate all of the electrical hardware required to install three-phase commercial solar systems. For little more than the cost of the components themselves, this solar switchboard saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Designed and certified by Registered Professional Engineers with CEC design accreditation and over 2 decades of commercial solar system design experience
Designed to meet the specific faults levels at each site.
Designed to meet distribution utilities network protection requirements
Simplifies engineering sign-off for solar projects.
Compliant with Australian and New Zealand standards
Compliant with appropriate electricity utility standards (i.e. optimum secondary network protection and cabling solution)
Indoor or outdoor installation
Temperature resistant enclosures to extend the life of electronics in the switchboard
Completely pre-wired and tested
Pre-labelled to AS/NZS5033 and AS/NZS4777 requirements with labels for mainboard also included
Professional Engineering Services
We have experienced in-house Registered Professional Engineers for design, test and inspection reports required by selected utilities for systems above 30kVA. (costs apply so contact us for pricing)
Schematic diagrams
Design Certification Reports (DCR)
Compliance Assessment Reports (CAR)
Power Quality Testing
We prepare fault level calculations which vary from site-to-site and determine the network protection requirements to suit the specific distribution utility's requirements.
200A max Commercial switchboard with Grid Protection Relay (GPR)
Ideal for commercial solar systems using a single inverter up to 110kW. Can be used with the following inverters:
SMA Sunny Tripower Core 2 110kW inverter SolarEdge 100kW inverter
This Solar Distribution Board is also suitable for most other inverter brands - contact us for compatibility.
Fully labelled with additional labels for main switchboard Grid protection relay (GPR) settings pre-configured to meet Australian Standards and utility requirements Specifications Secondary network protection & solar distribution board includes the following:
Metal enclosure, 800(H) x 600(W) x 250(D) mm
Powder-coated steel with top and bottom gland plates
IP 66 rated for outdoor installation
3-point lockable handle
200A MCCB main switch
200A MCCB inverter circuit breaker
200A N/O contactor
6A internal GPO
Spare 3 phase 6A MCB
Secondary network protection relay (preprogrammed to utility requirements)
Pre-labelled with additional labels included for main switchboard
All components pre-wired and checked with 2-step QA process
Suitable for a maximum fault current 17kA
Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2014, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016
The fastest and easiest way to install commercial solar systems
AC Solar Warehouse Commercial Solar Switchboards accommodate all of the electrical hardware required to install three-phase commercial solar systems. For little more than the cost of the components themselves, this solar switchboard saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Designed and certified by Registered Professional Engineers with CEC design accreditation and over 2 decades of commercial solar system design experience
Designed to meet the specific faults levels at each site.
Designed to meet distribution utilities network protection requirements
Simplifies engineering sign-off for solar projects.
Compliant with Australian and New Zealand standards
Compliant with appropriate electricity utility standards (i.e. optimum secondary network protection and cabling solution)
Indoor or outdoor installation
Temperature resistant enclosures to extend the life of electronics in the switchboard
Completely pre-wired and tested
Pre-labelled to AS/NZS5033 and AS/NZS4777 requirements with labels for mainboard also included
Professional Engineering Services
We have experienced in-house Registered Professional Engineers for design, test and inspection reports required by selected utilities for systems above 30kVA. (costs apply so contact us for pricing)
Schematic diagrams
Design Certification Reports (DCR)
Compliance Assessment Reports (CAR)
Power Quality Testing
We prepare fault level calculations which vary from site-to-site and determine the network protection requirements to suit the specific distribution utility's requirements.